We apologize for a recent technical issue with our email system, which temporarily affected account activations. Accounts have now been activated. Authors may proceed with paper submissions. PhDFocusTM
CFP last date
20 December 2024
Reseach Article

Design & Development of MPPT based Converter for Efficient Solar Power Conversion

Published on November 2013 by Prashant Meshram, U.b.mujumdar
2nd National Conference on Innovative Paradigms in Engineering and Technology (NCIPET 2013)
Foundation of Computer Science USA
NCIPET - Number 3
November 2013
Authors: Prashant Meshram, U.b.mujumdar
045115d8-6754-4769-80ef-91cafbbae67e

Prashant Meshram, U.b.mujumdar . Design & Development of MPPT based Converter for Efficient Solar Power Conversion. 2nd National Conference on Innovative Paradigms in Engineering and Technology (NCIPET 2013). NCIPET, 3 (November 2013), 35-39.

@article{
author = { Prashant Meshram, U.b.mujumdar },
title = { Design & Development of MPPT based Converter for Efficient Solar Power Conversion },
journal = { 2nd National Conference on Innovative Paradigms in Engineering and Technology (NCIPET 2013) },
issue_date = { November 2013 },
volume = { NCIPET },
number = { 3 },
month = { November },
year = { 2013 },
issn = 0975-8887,
pages = { 35-39 },
numpages = 5,
url = { /proceedings/ncipet/number3/568-1377/ },
publisher = {Foundation of Computer Science (FCS), NY, USA},
address = {New York, USA}
}
%0 Proceeding Article
%1 2nd National Conference on Innovative Paradigms in Engineering and Technology (NCIPET 2013)
%A Prashant Meshram
%A U.b.mujumdar
%T Design & Development of MPPT based Converter for Efficient Solar Power Conversion
%J 2nd National Conference on Innovative Paradigms in Engineering and Technology (NCIPET 2013)
%@ 0975-8887
%V NCIPET
%N 3
%P 35-39
%D 2013
%I International Journal of Computer Applications
Abstract

The design of a Maximum Power Tracking (MPPT) controller for a solar photovoltaic system is proposed utilizing a buck-converter topology. Solar panel voltage and current are continuously monitored by a closed-loop microcontroller based control system, and the duty cycle of the buck converter will be continuously adjusted to extract the maximum power. MATLAB Simulation will be used for the initial validation of the proposed scheme and for the selection of circuit parameters. Actual controller will be implemented using AVR series microcontroller.

References
  1. Solar Photovoltaic Fundamental, Technologies and Application by Chetan Singh Solanki
  2. Azadeh Safari and SaadMekhilef, "Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter"in, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 58, NO. 4, APRIL 2011
  3. Roger Gules, Juliano De Pellegrin Pacheco, HélioLeães Hey and JohninsonImhoff, "A Maximum Power Point Tracking System With Parallel Connection for PV Stand-Alone Applications" in, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 55, NO. 7, JULY 2008
  4. Eftichios Koutroulis, Kostas Kalaitzakis, "Development of a Microcontroller-Based Photovoltaic Maximum Power Point Tracking Control System" in,IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 16, NO. 1, JANUARY 2001
  5. Azadeh Safari and SaadMekhilef, "Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter" in, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 58, NO. 4, APRIL 2011
  6. Weidong Xiao, "Topology Study of Photovoltaic Interface for Maximum Power Point Tracking" in , IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 54, NO. 3, JUNE 2007
  7. D. P. Hohm and M. E. Ropp, "Comparative Study of Maximum Power Point Tracking Algorithms" in ,,IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 26, NO. 5, JANUARY 2008.
Index Terms

Computer Science
Information Sciences

Keywords

Solar PV technology MPPT Efficiency of PV system.